Home > News > Ningbo Qiaopu Electric Co., Ltd. power cord positive sequence impedance measurement process requirements

News

Ningbo Qiaopu Electric Co., Ltd. power cord positive sequence impedance measurement process requirements
2011-09-25 22:57:06
 

Ningbo Qiaopu Electric Co., Ltd. power cord positive sequence impedance measurement process requirements

Ningbo Qiaopu Electric Co., Ltd. power cord positive sequence impedance of the measurement process which requires Ningbo Qiaopu Electric Co., Ltd.
Manufacture of power cable conductor AC resistance and inductance of the cable three phase the same volume and is called the positive sequence impedance.
Positive sequence impedance of power cords is generally in the Ningbo Qiaopu electrical power cord drive directly measured, the measurement generally used when a lower voltage, therefore, need to step-down transformer to buck, buck uses star wiring, the general capacity to 11VA or more, have a wider range of voltage regulator, AC power measurements should be relatively stable, to ensure that measurements meet current requirements, the actual voltage meter readings must be the voltage power cord, preferably close to the power cord test current allow long-term carrying capacity, measured reading of the meter's value, after closing the current three tables simultaneously read the value.


Previous   [Return Home] [Print] [Go Back]   Next

Contact Us

  • Contact Person:

    Gavi Chen
  • Tel:

    +86-0574-62166266
  • +86-15888180299
  • Fax:

    +86-574-62179799
  • E-mail:

    gavi@plug9.com

点击这里给我发消息
Click here to send me a message.