Home > News > Ningbo Qiaopu Electric Co., Ltd. for the use of power line mixing

News

Ningbo Qiaopu Electric Co., Ltd. for the use of power line mixing
2011-09-05 23:23:19
 

Ningbo Qiaopu Electric Co., Ltd. for the use of power line mixing

We Qiaopu company will produce all kinds of colors of the power cord, so that there is mixing in the production process used, some mixing and a single material difference Qiaopu company has its own unique step mixing
1 Qiaopu required amount of time the mixture should not exceed the machine's load.
2 before cutting:
A: you must turn off the power, so as not to mix leaves and damaged body.
B: the hopper cleaned to avoid mixing.
3 by adding the raw material hopper, according to the mixing ratio by adding white mineral oil, stirring 6-8 minutes after power shut down by adding dye, dispersant, and then start stirring 12-15 minutes.
4 self-test after passing the material into a clean with a good Liaodai, seal the bag, so as not to other pigments, debris.
To enter, and a bag marked with the number and date of toner, the material stored in the designated area.
5 ingredients with a member in good material, you should fill out the "single-ingredient."
After 6 hours to shut down open hopper, Qiaopu's inspectors check whether the dye mix, if not stir, may be appropriate to increase again when the mix.
Qiaopu use such a rigorous program of science, is based on years of experience evolved.


Previous   [Return Home] [Print] [Go Back]   Next

Contact Us

  • Contact Person:

    Gavi Chen
  • Tel:

    +86-0574-62166266
  • +86-15888180299
  • Fax:

    +86-574-62179799
  • E-mail:

    gavi@plug9.com

点击这里给我发消息
Click here to send me a message.